American Ductile Iron Pipe Home Page

Tees and Crosses and Base Tees

AMERICAN Ductile Iron Mechanical Joint Fittings
ANSI/AWWA C110/A21.10
Tees and Crosses

Tees and Crosses | Compact Tees and Crosses
Base Tees | Size of Supporting Pipe for Base Fittings

*Plain Ends (PE's) on 4"- 20" MJ-PE-MJ Tees are beveled for insertion in Fastite bells.

Numerals on cuts indicate standard order of specifying size and joint type of fitting.

See Flanged Fittings for reducing tees, tees reducing on run and branch, and bullhead tees.

 

ADIP Table No. 5-11

Size
in.		 Pressure
Rating
psi		 Dimensions in Inches Weight in Pounds
Tee Cross
Run Branch T T1 H J S All
MJ		 MJ-PE
& MJ		 All
MJ		 MJ-PE-
MJ & MJ
4 4 350 0.52 0.52 6.5 6.5 14.5 80 75 105 100
6 4 350 0.55 0.52 8 8 16 115 110 140 135
6 6 350 0.55 0.55 8 8 16 125 120 160 155
8 4 350 0.6 0.52 9 9 17 165 160 185 180
8 6 350 0.6 0.55 9 9 17 175 170 205 200
8 8 350 0.6 0.6 9 9 17 185 180 235 230
10 4 350 0.68 0.52 11 11 19 235 235 260 260
10 6 350 0.68 0.55 11 11 19 250 250 285 285
10 8 350 0.68 0.6 11 11 19 260 260 310 310
10 10 350 0.8 0.8 11 11 19 310 310 380 380
12 4 350 0.75 0.52 12 12 20 315 315 340 340
12 6 350 0.75 0.55 12 12 20 325 325 360 360
12 8 350 0.75 0.6 12 12 20 340 340 385 385
12 10 350 0.87 0.8 12 12 20 390 390 460 460
12 12 350 0.87 0.87 12 12 20 410 410 495 495
*14 4 350 0.66 0.52 14 14 22 420 405 450 435
14 6 350 0.66 0.55 14 14 22 435 420 475 460
14 8 350 0.66 0.6 14 14 22 450 435 500 485
14 10 350 0.66 0.68 14 14 22 465 450 540 525
14 12 350 0.66 0.75 14 14 22 495 475 585 570
14 14 350 0.66 0.66 14 14 22 520 500 635 620
*16 4 350 0.7 0.52 15 15 23 525 505 555 535
16 6 350 0.7 0.55 15 15 23 540 520 575 555
16 8 350 0.7 0.6 15 15 23 550 530 605 585
16 10 350 0.7 0.68 15 15 23 570 550 645 625
16 12 350 0.7 0.75 15 15 23 590 570 685 665
16 14 350 0.7 0.66 15 15 23 620 600 735 715
16 16 350 0.7 0.7 15 15 23 650 625 790 770
18 6 350 0.75 0.55 13 15.5 21 590 565 625 600
18 8 350 0.75 0.6 13 15.5 21 605 580 655 630
18 10 350 0.75 0.68 13 15.5 21 620 595 685 660
18 12 350 0.75 0.75 13 15.5 21 640 615 725 700
18 14 350 0.75 0.66 16.5 16.5 24.5 755 730 870 845
18 16 350 0.75 0.7 16.5 16.5 24.5 785 760 930 905
18 18 350 0.75 0.75 16.5 16.5 24.5 820 795 995 965
20 6 350 0.8 0.55 14 17 22 725 695 760 730
20 8 350 0.8 0.6 14 17 22 735 705 790 760
20 10 350 0.8 0.68 14 17 22 755 725 820 790
20 12 350 0.8 0.75 14 17 22 775 745 860 830
20 14 350 0.8 0.66 14 17 22 795 765 905 875
20 16 350 0.8 0.7 18 18 26 945 915 1085 1055
20 18 350 0.8 0.75 18 18 26 985 950 1155 1120
20 20 350 0.8 0.8 18 18 26 1020 990 1230 1200
24 6 350 0.89 0.55 15 19 23 985 945 1025 985
24 8 350 0.89 0.6 15 19 23 1000 960 1045 1005
24 10 350 0.89 0.68 15 19 23 1020 980 1085 1045
24 12 350 0.89 0.75 15 19 23 1030 990 1110 1070
24 14 350 0.89 0.66 15 19 23 1055 1015 1155 1115
24 16 350 0.89 0.7 15 19 23 1075 1035 1200 1160
24 18 350 0.89 0.75 22 22 30 1400 1360 1590 1550
24 20 350 0.89 0.8 22 22 30 1450 1410 1675 1630
24 24 350 0.89 0.89 22 22 30 1535 1490 1835 1795
30 6 250 1.03 0.55 18 23 26 1730 1615 1770 1655
30 8 250 1.03 0.6 18 23 26 1745 1630 1795 1680
30 10 250 1.03 0.68 18 23 26 1760 1645 1830 1715
30 12 250 1.03 0.75 18 23 26 1780 1665 1865 1750
30 14 250 1.03 0.66 18 23 26 1800 1685 1905 1790
30 16 250 1.03 0.7 18 23 26 1820 1705 1950 1835
30 18 250 1.03 0.75 18 23 26 1845 1730 2000 1885
30 20 250 1.03 0.8 18 23 26 1875 1760 2060 1945
30 24 250 1.03 0.89 25 25 33 2400 2280 2675 2560
30 30 250 1.03 1.03 25 25 33 2595 2480 3075 2955
36 8 250 1.15 0.6 20 26 28 2520 2345 2565 2390
36 10 250 1.15 0.68 20 26 28 2535 2360 2600 2425
36 12 250 1.15 0.75 20 26 28 2550 2375 2630 2455
36 14 250 1.15 0.66 20 26 28 2570 2395 2665 2490
36 16 250 1.15 0.7 20 26 28 2585 2410 2705 2530
36 18 250 1.15 0.75 20 26 28 2610 2435 2750 2575
36 20 250 1.15 0.8 20 26 28 2635 2460 2805 2630
36 24 250 1.15 0.89 20 26 28 2690 2515 2910 2735
36 30 250 1.15 1.03 28 28 36 3545 3365 3965 3790
36 36 250 1.15 1.15 28 28 36 3745 3565 4370 4190
42 12 250 1.28 0.75 23 30 31 3555 3335 3640 3420
42 14 250 1.28 0.66 23 30 31 3575 3355 3675 3455
42 16 250 1.28 0.7 23 30 31 3595 3375 3715 3495
42 18 250 1.28 0.75 23 30 31 3615 3395 3755 3535
42 20 250 1.28 0.8 23 30 31 3640 3420 3810 3590
42 24 250 1.28 0.89 23 30 31 3690 3470 3910 3690
42 30 250 1.28 1.03 31 31 39 4650 4425 5040 4815
42 36 150 1.28 1.15 31 31 39 4880 4655 5425 5200
42 36 250 1.78 1.58 31 31 39 6075 5850 6655 6430
42 42 150 1.28 1.28 31 31 39 5085 4860 5840 5615
42 42 250 1.78 1.78 31 31 39 6320 6095 7145 6920
48 12 250 1.42 0.75 26 34 34 4870 4580 4955 4665
48 14 250 1.42 0.66 26 34 34 4885 4595 4985 4695
48 16 250 1.42 0.7 26 34 34 4905 4615 5025 4735
48 18 250 1.42 0.75 26 34 34 4925 4635 5065 4775
48 20 250 1.42 0.8 26 34 34 4950 4660 5115 4825
48 24 250 1.42 0.89 26 34 34 4995 4705 5210 4920
48 30 250 1.42 1.03 26 34 34 5140 4855 5495 5210
48 36 250 1.42 1.15 34 34 42 6280 5995 6790 6500
48 42 150 1.42 1.28 34 34 42 6510 6225 7150 6860
48 42 250 1.96 1.78 34 34 42 8130 7845 8815 8530
48 48 150 1.42 1.42 34 34 42 6765 6475 7655 7370
48 48 250 1.96 1.96 34 34 42 8420 8135 9380 9095

Notes:

*Not included in AWWA C110

Note: Welded-on outlets may be preferable to tees and crosses in many cases from a layout, installation and economical standpoint. See Specials.

See General Notes.

Back to top

AMERICAN Ductile Iron Mechanical Joint Fittings
ANSI/AWWA C153/A21.53
Compact Tees and Crosses

Tees and Crosses | Compact Tees and Crosses
Base Tees | Size of Supporting Pipe for Base Fittings

ADIP Table No. 5-12

Size
in.		 Pressure
Rating
psi		 Dimensions in Inches Weight in Pounds
Tee Cross
Run Branch T
nom.		 T1
nom.		 H
min.		 J
min.		 All
MJ		 All
MJ
4 4 350 0.34 0.34 4 4 32 42
6 4 350 0.36 0.34 4 5 51 -
6 6 350 0.36 0.36 5 5 63 72
8 4 350 0.38 0.34 4 6.5 61 -
8 6 350 0.38 0.36 5 6.5 75 -
8 8 350 0.38 0.38 6.5 6.5 87 108
10 4 350 0.4 0.34 4 7.5 80 -
10 6 350 0.4 0.36 5 7.5 93 -
10 8 350 0.4 0.38 6.5 7.5 102 -
10 10 350 0.4 0.4 7.5 7.5 117 144
12 4 350 0.42 0.34 4 8.75 98 -
12 6 350 0.42 0.36 5 8.75 113 -
12 8 350 0.42 0.38 6.5 8.75 123 -
12 10 350 0.42 0.4 7.5 8.75 137 -
12 12 350 0.42 0.42 8.75 8.75 156 214
14 4 350 0.47 0.34 5.5 10.5 172 -
14 6 350 0.47 0.36 6.5 10.5 183 -
14 8 350 0.47 0.38 7.5 10.5 206 -
14 10 350 0.47 0.4 8.5 10.5 229 -
14 12 350 0.47 0.42 9.5 10.5 235 -
14 14 350 0.47 0.47 10.5 10.5 281 344
16 6 350 0.5 0.36 6.5 11.5 229 -
16 8 350 0.5 0.38 7.5 11.5 248 -
16 10 350 0.5 0.4 8.5 11.5 265 -
16 12 350 0.5 0.42 9.5 11.5 281 -
16 14 350 0.5 0.47 10.5 11.5 317 -
16 16 350 0.5 0.5 11.5 11.5 323 410
18 6 350 0.54 0.36 6.5 12.5 275 -
18 8 350 0.54 0.38 7.5 12.5 280 -
18 10 350 0.54 0.4 8.5 12.5 286 -
18 12 350 0.54 0.42 9.5 12.5 370 -
18 14 350 0.54 0.47 10.5 12.5 415 -
18 16 350 0.54 0.5 11.5 12.5 445 -
18 18 350 0.54 0.54 12.5 12.5 490 -
20 6 350 0.57 0.36 6.5 14 335 -
20 8 350 0.57 0.38 8 14 383 -
20 10 350 0.57 0.4 9 14 410 -
20 12 350 0.57 0.42 10 14 432 -
20 14 350 0.57 0.47 11 14 475 -
20 16 350 0.57 0.5 12 14 530 -
20 18 350 0.57 0.54 13 14 560 -
20 20 350 0.57 0.57 14 14 605 -
24 6 350 0.61 0.36 13 17 615 650
24 8 350 0.61 0.38 13 17 621 655
24 10 350 0.61 0.40 13 17 628 680
24 12 350 0.61 0.42 13 17 634 690
24 14 350 0.61 0.47 13 17 650 720
24 16 350 0.61 0.50 13 17 663 750
24 18 350 0.61 0.54 17 17 788 910
24 20 350 0.61 0.57 17 17 804 935
24 24 350 0.61 0.61 17 17 841 1010
30 20 250* 0.66 0.57 16.5 21 1110 1220
30 24 250* 0.66 0.61 22 22 1420 1660
30 30 250* 0.66 0.66 22 22 1525 1860
36 24 250* 0.74 0.61 18.5 26 1660 1865
36 30 250* 0.74 0.66 26 26 2200 2580
36 36 250* 0.74 0.74 26 26 2240 2670
42 24 250* 0.82 0.61 22 27.5 2235 2350
42 30 250* 0.82 0.66 22 29.5 2525 2920
42 36 250* 0.82 0.74 30 30 3130 3675
42 42 250* 0.82 0.82 30 30 3360 4090
48 24 250* 0.90 0.61 23 32 3070 3200
48 30 250* 0.90 0.66 23 32 3375 3785
48 36 250* 0.90 0.74 33.5 32.25 4405 5045
48 42 250* 0.90 0.82 33.5 33.5 4615 5465
48 48 250* 0.90 0.90 33.5 33.5 5045 6220

Notes:
Numerals on cuts indicate standard order of specifying size and joint type of fitting.

See Flanged Fittings for reducing tees, tees reducing on run and branch, and bullhead tees.

See General Notes.
* Based on performance testing per AWWA C153, AMERICAN can rate these fittings 350 psi. However, because of the more labor-intensive and labor-reliant assembly of the MJ joint and the substantial thrust restraint requirements for working pressures that high, we recommend push-on joint configurations (Fastite, Flex-Ring and Lok-Ring) for high-pressure applications.

Back to top

AMERICAN Ductile Iron Mechanical Joint Fittings
ANSI/AWWA C110/A21.10
Base Tees

Tees and Crosses | Compact Tees and Crosses
Base Tees | Size of Supporting Pipe for Base Fittings

ADIP Table No. 5-23

Size
in.		 Pressure
Rating
psi		 Dimensions in Inches Weight in Pounds
R S
Dia.		 T U All MJ MJ-PE
& MJ		 Base
Only
30 250 23 16 1.19 1.15 2715 2600 120
36 250 26 19 1.25 1.15 3905 3725 160
42 150 30 23.5 1.44 1.28 5355 5130 270
42 250 30 23.5 1.44 1.28 6590 6365 270
48 150 34 25 1.56 1.42 7100 6810 335
48 250 34 25 1.56 1.42 8755 8470 335

Notes:
Bases are faced and drilled only when specified. See Flanged Fittings.

Dimension "R" is a finished dimension; unfinished bases will be slightly longer.

Bases of these fittings are intended for support in compression and are not to be used for anchors or supports in tension or shear.

Base dimensions are applicable to Tees reducing on the branch as well as full opening Tees.

For weight of Reducing Base Tee add weight of base to weight of tee shown in Table No. 5-11.

See General Notes.

Back to top

Size of Supporting Pipe for Base Fittings

Tees and Crosses | Compact Tees and Crosses
Base Tees | Size of Supporting Pipe for Base Fittings

ADIP Table No. 5-24

Fitting Size-in. Supporting Flange
Pipe Size-in.
30 10
36 12
42 16
48 18
Back to top

 

> Tees and Crosses 
> Compact Tees and Crosses 
> Base Tees 
> Size of Supporting Pipe for Base Fittings


 
 
© 1995 – 2008, American Cast Iron Pipe Company
Site Map | Contact Us